spec no: dsaf1601 rev no: v.5 date: nov/18/2010 page: 1 of 5 approved: wynec checked: joe lee drawn: f.f.zhou erp: 1332001021 101.6mm (4.0 inch) 5x7 dot matrix dis- play part number: TBA40-11SURKCGKWA hyper red green features z 4.0 inch matrix height. z dot size 10mm. z low current operation. z high contrast and light output. z stackable horizontally. z easy mounting on p.c. boards or sockets. z multicolor available. z mechanically rugged. z standard : gray face, white dot. z rohs compliant. description the hyper red source color devices are made with al- gainp on gaas substrat e light emitting diode. the green source color devices are made with algainp on gaas substrate light emitting diode. package dimensions & internal circuit diagram notes: 1. all dimensions are in millimeters (inches), tolerance is 0.25(0.01")unless otherwise noted. 2. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice .
spec no: dsaf1601 rev no: v.5 date: nov/18/2010 page: 2 of 5 approved: wynec checked: joe lee drawn: f.f.zhou erp: 1332001021 selection guide note: 1. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. part no. dice lens type iv (ucd) [1] @ 10ma description min. typ. TBA40-11SURKCGKWA hyper red (algainp) white diffused 88000 240000 green (algainp) 52000 140000 column anode symbol parameter device typ. max. units test conditions peak peak wavelength hyper red green 650 574 nm i f =20ma d [1] dominant wavelength hyper red green 630 570 nm i f =20ma ? 1/2 spectral line half-width hyper red green 28 20 nm i f =20ma c capacitance hyper red green 35 15 pf v f =0v;f=1mhz v f [2] forward voltage (per dot) hyper red green 3.9 4.2 5.0 5.0 v i f =20ma i r reverse current (per dot) hyper red green 10 ua v r =5v parameter hyper red green units power dissipation (per dot) 150 150 mw dc forward current (per dot) 30 30 ma peak forward current [1] (per dot) 185 150 ma reverse voltage (per dot) 5 v operating/storage temperature -40c to +85c lead solder temperature [2] 260c for 3-5 seconds
spec no: dsaf1601 rev no: v.5 date: nov/18/2010 page: 3 of 5 approved: wynec checked: joe lee drawn: f.f.zhou erp: 1332001021 TBA40-11SURKCGKWA hyper red
spec no: dsaf1601 rev no: v.5 date: nov/18/2010 page: 4 of 5 approved: wynec checked: joe lee drawn: f.f.zhou erp: 1332001021 green
spec no: dsaf1601 rev no: v.5 date: nov/18/2010 page: 5 of 5 approved: wynec checked: joe lee drawn: f.f.zhou erp: 1332001021 packing & label specifications TBA40-11SURKCGKWA
|
